YIHUA 959D-Digital Hot Air Rework Station, High Power with 3 Memories, Airflow Efficiency, °F /°C Display, Accurate Temp.(212°F~932°F), Brushed Aluminum Panel & Safety Features

A rework station equipped with advanced functions, essential accessories and tools. This station comes with 3 Preset Channels, PID Temperature Stabilization，In-Holder Standby Mode, Digital Temperature Calibration, °C/°F Temperature Display Modes, and more. You can use this station for applications including but not limited to SMD soldering, SMD hot air rework. You can save up to three sets of temperature settings into the three preset channels, so you don't have to constantly adjust temperature settings for works that are different in temperature requirement. How it works: You can set Channel 1 to 662°F (350°C) for component A, Channel 2 to 716°F (380°C) for component B, Channel 3 to 212°F (100°C) for heat shrinking. While you're working, you can switch between these settings with just ONE press of a button. In conjunction with the temperature control function, the PID programme keeps the temperature stabilized at the set temperature when you're working. How it works: As the hot air transfers heat onto the solder joint, the PID programme compensates the heat fluctuation in milliseconds with just the right amount of power to keep your hot air gun at the set temperature. Working with component temperature requirements that are different in units? With this function, you no longer have to convert the units by yourself. You can use our Fahrenheit / Celsius unit display function to select the unit that you want to work with. When you put the hot air gun in the holder, the temp. will automatically cool to below 212°F(100°C). And when you pick it up, it will automatically heat up to the set temperature. This function can extend the consumable parts' lifespan, such as the heating element, and improve work efficiency.